Instead of a complete demolition, a chimney and chimney chest under the roofline can be removed while leaving the chimney and blocking the chimney drain. When we replaced our chimney with a steel vent, we saved all the bricks and then used them for a new brick walkway in the front yard that looks very beautiful. However, it took a long time for the large pieces of mortar to be cut. I paid my children for it, and it took days and days, with buckets of white dust, to get rid of them afterwards. Many of them were also stained with tar from years of fires, but in fact, it turned out to be good, as it gave the brick path some variety. Removing an outdoor fireplace costs an average of $500 to $2,000, depending on the size, frame, fuel source, accessibility and whether it is self-contained. Demolition of masonry and brick costs $25 to $50 per vertical foot, and hiring contractors to disconnect the gas line and wiring costs $200 to $500. Annual maintenance is important to keep the chimney in safe operating conditions. A chimney sweep costs $149 to $250 and must be swept at least once a year to avoid creosote deposits, according to the National Fire Protection Association. Removing a brick chimney is easy.

You shouldn`t have to pay much for demolition. Workers would like to do that. You can also try selling the bricks. Owners For chimneys that run along the outside of a house, such as a “bolt”, the entire chimney must be demolished above and below the roofline. In some cases, it is necessary to leave the chimney intact when removing the trunk if: We have found that we need to remove our chimney and three-story combustion chamber, repair the outer wall and part of the roof that needs to be filled after the chimney, and build a new frame to allow direct ventilation, zero-release fireplace insert that we have chosen. We do this for seismic safety, b/c the chimney already separates from the house and for environmental reasons. Can anyone recommend a contractor to do it for us? Or does someone who has gone through this want to pass on pearls of wisdom? Jennifer An abandoned chimney is a partially removed chimney or chimney chest that: The average cost of removing a chimney is $800 to $2,000, which includes everything above the roofline. Chimney removal includes scaffolding, chimney demolition, removal of chimney cladding and debris, chimney hole sealing, and roof repairs. A complete fireplace and chimney sweeping are possible.

Alternatively, a chimney and chimney chest can be removed by leaving the chimney and blocking the chimney drain. Consult a structural engineer to confirm that the frame does not rest on masonry prior to demolition to ensure the structural integrity of the home. An on-site demolition of a stone, masonry or brick fireplace costs $25 to $50 per vertical linear foot, without structural support, debris removal or home repair. Repairs to walls, floors, siding, paint and roofs cost $1,000 to $2,000 to repair the area where the fireplace or stove was located. Leaks and moisture problems can be repaired by partial demolition, e.B. by installing new roof flashes and joints, replacing chimney mortar, adding a chimney plug, repairing the chimney crown or removing the chimney and roof covering above the entry point. The average cost of removing a chimney chest is $1,500 to $2,500, including hiring a structural engineer, demolition, structural support, and repairing walls, ceilings, and floors. A chimney chest surrounds the chimney from ceiling to floor and can be removed without demolishing the chimney.

Chimney repairs such as plugging cracks and leaks or replacing the chimney cladding are possible, but repairing a shredding chimney requires removal, remodeling or replacement. Chimney repairs cost $200 to $3,500 and replacing a chimney costs $4,000 to $15,000. The average cost of removing a fireplace or wood stove is $500 to $1,000 for demolition, debris removal, chimney closure, and patching of walls, ceiling and roof. Additional charges may apply for the removal or recovery of the ventilation system. Moving a fireplace a few centimeters is an easier job than moving it to another room. If you move a chimney built of masonry built on site by a few centimeters, the existing chimney can be used by moving the chimney. A chimney should not be moved more than 30 degrees from the vertical. A demolition permit to remove a chimney costs an average of $20 to $150. Local authority permits are generally required for: Supporting a chimney costs $50 to $500 per square foot, depending on size, weight, and material. Steel beams or stem supports provide chimney support, but are generally not needed in homes built after the 1930s.

Prices depend on the size and location of the chimney in the house, the number of floors the chimney passes through, the materials used in the construction and the amount of reinforcement recommended by a structural engineer. We have a fireplace and fireplace (about 8 feet high, exterior bricks) that come from our room on the third floor of our 1940s mixed style home. We will never use the fireplace and I wonder if anyone 1) removed a chimney like this – were there any structural or other problems and how much did it cost? and 2) removed a chimney like this and the whole chimney – what were the problems and how much did it cost? I am increasingly paranoid that it will kill us in our sleep in the event of an earthquake! Plus, it`s also pretty ugly and it would be nice to have it gone. I`ve seen previous articles and I`m not looking for recommendations at this point, I`m just curious about other people`s experiences and how much it costs. Thank you very much. As part of a foundation replacement, we dug our basement to be deeper. As the dirt that supported the chimney went away, the chimney had to leave. The team that did the work dismantled the chimney from above and dropped bricks into the increasingly short chimney until it disappeared. Our chimney didn`t run outside the house, it went through an internal chase, so we didn`t have the exterior finishing issues you`re going to have. Other costs may include closing the chimney, blocking or removing pipes and vents, removing trimmings and flashings, repairing drywall (if ventilated directly through a wall), and adding adjacent clamps or beams to further support the chest. Removing and replacing a chimney cladding costs $1,200 to $4,600, or between $30 and $120 per linear foot, including equipment and installation. Prices depend on the length, diameter and condition of the lining, the type of lining to be installed and whether or not there is a risk of asbestos.

The removal of a chimney itself is a messy and dangerous home renovation project that can cause major structural damage. This is not a feasible DIY project. Here`s what you can expect when hiring an experienced demolition contractor. Founded in 1990, Valley provides expert demolition services to the entire Sacramento area, including complete body removal. We have the experience and technology to properly remove your chimney to ensure your roof remains leak-free and structurally flawless. The complete reconstruction of a chimney costs between $1,000 and $3,500 and includes the demolition of the old chimney, the removal of masonry debris, the construction of a new chimney and the installation of a new chimney cladding. The high-end price reflects the reconstruction of a high chimney. Try Urban Ore in front of Ashby Lumber. I`m not sure what they`re going to give you, but you can take trading or money.

Old bricks with a patinated character are more expensive to buy than new bricks, but bricks made of chimneys usually require a lot of work to cut the old mortar. Claudia Uncapping a chimney costs $50 to $2,000 for the cap and $100 to $200 for installation. Restoring an old capped fireplace often requires installing a new chimney cladding for $90 to $700. Once the cap is opened, it is important to have the chimney sweep inspected to determine if it is safe to use. A damaged chimney can be dangerous and lead to a higher risk of chimney fire. .